Vaporesso Vibe Pods

The Vaporesso Vibe pods are the official 2-pack replacement consumable for the Vibe SE 2 pod kit, supplied as dual mesh smart pods with two built-in coils inside every single pod.

Each pod holds 2ml of e-liquid (UK TPD compliant), refills through a side-fill port with a soft silicone tab, and uses a transparent body so you can keep an eye on the liquid level mid-session.

These are also the pods customers search for as Vaporesso Vibe S2 pods, a naming variant that points to the same product.

Because each pod carries two coils, the Vibe SE 2 kit decides which one fires depending on the mode you select. ECO Mode pulls from the higher-ohm coil for a tighter, e-liquid-saving draw, while Power Mode switches to the lower-ohm coil for warmer vapour and stronger flavour. There is no coil to fit, no cotton to prime by hand, and no second pod to swap when you change vape style - one pod handles both.

Vibe SE 2 Dual Mesh Pods

Sold as a 2-pack at a single price point regardless of resistance, the Vaporesso Vibe replacement pods come in two coil pairings: 0.6 ohm / 0.8 ohm for a warmer Power hit and a smoother restricted direct lung draw, and 0.7 ohm / 1.0 ohm for medium-warm Power vaping with a tighter mouth-to-lung style on ECO Mode.

Both pairings share the same housing, side-fill port and transparent window.

Vibe pods accept nicotine salts and 50/50 freebase e-liquids, the two profiles best suited to low-wattage pod hardware. They are not built for high-VG shortfills, which struggle to wick through the dual mesh setup at Vibe wattages.

Key Features

• 2-Pack of Vibe Pods - two ready-to-fill pods per pouch, one resistance pairing per pack
• Dual Mesh Smart Coils Built In - two coils inside every pod, no separate coil heads to fit
• Automatic Coil Switching - the kit fires the correct coil based on ECO or Power mode selection
• 2ml TPD Capacity - UK-compliant e-liquid volume per pod
• Side Fill with Silicone Tab - lift the rubber port without removing the pod from the kit
• Transparent Pod Body - clear visibility of e-liquid level mid-session
• Two Resistance Pairings - 0.6/0.8 ohm XL for warmer RDL, 0.7/1.0 ohm XL for tighter MTL
• MTL and RDL in One Pod - switch vape style by switching mode, not by switching pod

ECO and Power Mode

Each Vibe pod packs two coils with different resistances. The Vibe SE 2 kit reads your mode selection and fires the matching coil, which means one pod gives you two distinct vape experiences. ECO Mode favours the higher-ohm coil for tighter draws and longer battery life, while Power Mode unlocks the lower-ohm coil for warmer vapour and a punchier flavour profile.

Pod Variant	Power Mode	ECO Mode
0.6 ohm / 0.8 ohm XL	0.6 ohm coil - warmer vapour, restricted direct lung	0.8 ohm coil - smoother RDL, longer battery
0.7 ohm / 1.0 ohm XL	0.7 ohm coil - medium warmth, loose MTL to tight RDL	1.0 ohm coil - tight MTL, cigarette-style draw

Which Vibe Pod Should You Pick

Choose the 0.6 ohm / 0.8 ohm XL pod if you want warmer vapour and a slightly looser, more flavour-forward draw.

Power Mode on this pod fires the 0.6 ohm coil for a denser hit, and ECO Mode drops down to the 0.8 ohm coil for a smoother restricted direct lung pull.

It suits vapers who enjoy a fuller cloud and richer flavour without going sub-ohm.

Pick the 0.7 ohm / 1.0 ohm XL pod if you are coming from cigarettes or you prefer a tight mouth-to-lung style.

ECO Mode runs the 1.0 ohm coil for a cigarette-like cheek-and-lung draw with maximum nic salt efficiency, while Power Mode taps the 0.7 ohm coil when you want a slightly warmer hit without losing tightness.

It is the better pick for ex-smokers chasing throat hit over cloud size.

Vibe Pod Compatibility

These pods are designed for the Vaporesso Vibe SE 2 pod kit, the current device in the Vibe family.

The Vibe SE 2 supersedes the earlier Vibe and Vibe SE kits in the range, and these pods are the only consumable Vaporesso supplies for the current Vibe platform.

Pairing with E-Liquids

For the 0.7 ohm / 1.0 ohm XL pod, lean into nicotine salt e-liquids at 10mg or 20mg. The tighter MTL draw on ECO Mode delivers a quick, satisfying nicotine hit without harshness, which is exactly what salts are built for. This is the pairing most ex-smokers gravitate to.

For the 0.6 ohm / 0.8 ohm XL pod, you have more flexibility.

Salts still work well on either mode, but 50/50 freebase e-liquids shine here, especially in Power Mode where the warmer 0.6 ohm coil pulls out more flavour notes from fruit and dessert profiles.

Skip high-VG shortfills - they are too thick for the dual mesh wicking at Vibe wattages.

Vibe Pod Specifications

Capacity	2ml (UK TPD)
Coil Type	Built-in dual mesh smart coils
Resistance Variants	0.6 ohm / 0.8 ohm XL or 0.7 ohm / 1.0 ohm XL
Coil Switching	Automatic via Vibe SE 2 ECO / Power Mode
Fill Type	Side fill with silicone tab port
Pod Body	Transparent for visible e-liquid level
Vaping Style	MTL and RDL (mode dependent)
E-Liquid Type	Nicotine salts and 50/50 freebase
Compatibility	Vaporesso Vibe SE 2 pod kit
Pack Size	2 pods per pack
Connection	Magnetic, drop-in fit

Installing a New Vibe Pod

Lift the silicone tab on the side of the pod, fill with your chosen 10ml nic salt or 50/50 e-liquid up to the 2ml line, close the tab and let the pod stand upright for 3 to 5 minutes so the wicking saturates. Drop the new pod into the Vibe SE 2 magnetic socket - it can only fit one way thanks to the magnetic alignment.

Switch the kit to ECO Mode for a tighter draw or Power Mode for a warmer hit. There is no coil to prime separately because the dual mesh coils are sealed inside the pod.

What's in the Box

• 2x Vaporesso Vibe Dual Mesh Smart Pod (in your chosen resistance pairing, 2ml each)

Vaporesso Vibe pods sit within the wider Vaporesso replacement pod range at Ecigone, alongside Vaporesso coils and the full Vaporesso collection.

Other Vaporesso Pods to Consider

If your kit is not a Vibe SE 2, these adjacent Vaporesso pod ranges may be the right consumable for your kit.

• Vaporesso Luxe XR Replacement Pods
• Vaporesso Armour G/GS Pod Cartridges
• Vaporesso Luxe X COREX 2.0 Pods