Vaporesso Pods

Replacement Pods for Every Vaporesso Kit

Vaporesso replacement pods cover every refillable Vaporesso pod kit currently sold in the UK - the XROS family, the Luxe X family, the Luxe XR pod-mod family, the Luxe Q starter, the Eco Nano range, the Armour G and GS pod cartridge platform and the Vibe SE 2.

Whether you arrived searching vaporesso replacement pods, vaporesso refill pods, vaporesso pod cartridges or vaporesso vape pods, every pod on this hub is a genuine Vaporesso cartridge built around either an integrated COREX mesh coil or the replaceable GTX coil platform.

The Dojo Blast prefilled side of the Vaporesso pod story sits on the matching Dojo prefilled pod range.

Vaporesso pods are platform-led rather than kit-led, so a single pod SKU often serves several kits in the same family. XROS-family pods are cross-compatible across COREX 2.0 and COREX 3.0 generations, and Luxe XR pods accept any 510-threaded GTX coil from 0.15 ohm sub-ohm right through to 1.2 ohm tight MTL.

Pack sizes run from 2-packs (Luxe X COREX, Luxe XR, Eco Nano, Armour G/GS) through 3-packs (Vibe Dual Smart) and 4-packs (XROS COREX 2.0, XROS COREX 3.0, Luxe Q). So the per-pod price drops with the larger family packs.

Vaporesso Pod Range by Kit Family

Every Vaporesso pod kit takes a specific pod. The table below maps the in-stock pod cartridges to the kit families they fit. All UK pods are 2ml TPD-compliant.

Pod cartridge	Fits kit family	Draw style	Pack
XROS COREX 2.0	XROS 4, 5 + Mini, Nano, Pro 2	MTL + RDTL	4-pack
XROS COREX 3.0	XROS 4, 5 + Mini, Nano, Pro 2	MTL + RDTL	4-pack
Luxe X COREX 2.0	Luxe X, X Pro, X3	MTL + DTL	2-pack
Luxe X Dual Mesh	Original Luxe X	MTL + DTL	2-pack
Luxe XR Pods	Luxe XR, XR Max, XR Max 2	MTL + DTL	2-pack
Luxe Q Pods	Luxe Q starter	MTL	4-pack
Eco Nano Pods	Eco Nano family	MTL + RDTL	2-pack
Armour G/GS Cartridge	Armour G, Armour GS	DTL	2-pack
Vibe Dual Smart	Vibe SE 2	MTL + RDTL	3-pack

Vaporesso Pod Compatibility Quick Check

The fastest way to identify the right cartridge is to read the kit name printed on the device body. The XROS family (4, 4 Mini, 5, 5 Mini, 5 Nano, Pro 2) all share the COREX pod platform - both 2.0 and 3.0 generations fit every XROS kit. So the choice is coil tech generation rather than kit compatibility.

The Luxe X family splits: original Luxe X uses the Dual Mesh 3ml pod, while Luxe X Pro, Luxe X2 and Luxe X3 use the COREX 2.0 platform. Luxe XR and XR Max kits use the GTX-coil Luxe XR pod (the coil is replaceable inside the pod). Luxe Q is its own platform.

Armour G and GS share a pod cartridge. Eco Nano, Nano 2, Nano Pro and the newer Eco Nano Plus all take the Eco Nano replacement pod. Sometimes searched as vaperesso pods, vapresso pods or vaper vaporesso pods - all variants land on this same Vaporesso pod hub.

COREX 2.0 vs COREX 3.0 - Which Vaporesso Pod Should You Buy?

COREX is Vaporesso's integrated mesh coil platform. Both COREX 2.0 and COREX 3.0 pods fit every current XROS kit and every current Luxe X-series kit - they are cross-compatible across the kit generation, so the choice between them is about coil technology, not kit fit.

Feature	COREX 2.0	COREX 3.0
Mesh coil design	Flat mesh with SSS leak-resistant tech	Hive Mesh honeycomb with Cumulus cotton wicking
Approx pod life	Approximately 5-7 tanks per pod	Approximately 7-10 tanks per pod
Flavour profile	Warmer, denser, balanced	Sharper top notes, approximately 40% richer aroma
Vapour density	Standard mesh output	Denser, faster ramp-up
Best for	50/50 nic salts, light DTL	Nic salts, hybrid nicotine, RDTL
Pack size	4-pack	4-pack
Kit compatibility	XROS 4/5 family + Luxe X family	XROS 4/5 family + Luxe X family

Many Vaporesso vapers keep both generations on rotation: COREX 2.0 for sweet dessert flavours where the balanced mesh shines, COREX 3.0 for sharper menthol or fruit blends where the denser mesh holds the top notes longer. See the full XROS kit range for current-gen XROS hardware that pairs with both COREX pods.

Pod Coil Style - MTL, RDTL and DTL Explained

Vaporesso pods come in three draw styles depending on which kit they fit. MTL (mouth-to-lung) pods, like the Luxe Q and XROS COREX in 1.0 ohm, give a tight cigarette-style draw and pair best with high-PG nic salts.

RDTL (restricted direct-to-lung) pods, like the XROS COREX in 0.6 ohm or the Eco Nano 0.6, give a looser airy draw with more vapour. DTL (direct-to-lung) pods like the Luxe X COREX 0.4 ohm and the Armour G/GS cartridge produce the densest vapour and pair with hybrid nicotine or shortfills mixed with a nic shot.

Most Vaporesso pod kits include an airflow ring or slider so you can shift between MTL and RDTL on the same pod without changing the pod itself.

COREX Mesh Coil Technology Inside Each Pod

Inside every integrated-coil Vaporesso pod sits a sheet of laser-etched stainless steel mesh wrapped in Japanese organic cotton. The mesh sits flat on the COREX 2.0 platform and curves into a honeycomb dome on COREX 3.0, which Vaporesso calls Hive Mesh.

The cotton on the latest pods is rebranded as Cumulus cotton - a denser organic wick that holds approximately 18% more e-liquid per surface area than the standard wick on COREX 2.0.

The mesh ramps to vaping temperature in roughly 0.3 seconds on a draw-activated pod kit and stays inside a tight 200-230 degree Celsius window thanks to Vaporesso's AXON pulse-fire chipset. Which fires the coil in microsecond bursts rather than a continuous current.

The net effect is steadier flavour across the pod full 5 to 10 refill lifespan and far less chance of a dry hit on the first puff after a refill. SSS leak-resistant silicone seals at the base of every COREX pod block the four most common leak points: coil base, fill port, pod-to-device contact and pod-to-mouthpiece seam.

Replaceable GTX Coils Inside Luxe XR and Armour Pods

Two Vaporesso pods on this hub do not use an integrated coil. The Luxe XR pod and the Armour G/GS cartridge both host a Vaporesso GTX coil that screws into the base of the pod and lifts straight out when the flavour drops.

The advantage is the pod body itself lasts approximately three to four months instead of three to four weeks, because only the coil reaches end-of-life. GTX coils for Luxe XR run from 0.15 ohm sub-ohm right through to 1.2 ohm tight MTL.

So a single pod can switch from a tight cigarette draw at 1.0 ohm to a restricted-lung 0.4 ohm with a 30-second coil swap. The Armour G/GS cartridge takes the GTX Tank coils (0.2 ohm Mesh and 0.4 ohm Single Mesh) for full direct-to-lung sub-ohm vaping.

Both pods are listed in the Vaporesso GTX coils range alongside the GTX 2.0, GTi and GTR coils for tank-based Vaporesso kits.

Pod Generation Lineage - Where Each Pod Fits

Vaporesso's pod platforms have evolved through clear generational steps. The Luxe Q pod (2021) was the brand first 4-pack 2ml pod, MTL-only, with a 1.2 ohm integrated coil. The XROS pod platform (2022 onwards) added side-fill ports, airflow adjustment and two resistance options and grew into the COREX 2.0 generation.

The Eco Nano pod followed with COREX Smooth mesh tuned for sweet dessert flavours. Luxe XR broke the integrated-coil pattern with replaceable GTX coils, and COREX 3.0 launched in 2024 as a drop-in upgrade for every XROS and Luxe X kit. Vibe Dual Smart pods landed in 2026 for the Vibe SE 2.

Knowing which generation your kit ships with is the fastest way to land on the right pod cartridge.

Pairing Your Vaporesso Pod with E-Liquid

MTL pods (Luxe Q, XROS COREX 1.0 ohm) pair best with 50/50 PG/VG nic salts in 10mg or 20mg - the higher PG carries flavour clean through a tight draw. RDTL pods (XROS COREX 0.6 ohm, Eco Nano 0.6, Vibe Dual Smart) pair with 40/60 nic salts or hybrid nicotine for a smoother throat hit at the same strength.

DTL pods (Luxe X COREX 0.4 ohm, Armour G/GS) pair with 70/30 high-VG shortfills plus a nic shot. Or with 60/40 hybrid nic salts for less cloud and more flavour. Browse the matching nic salt e-liquids range or the shortfill e-liquids range for DTL setups.

Vaporesso own nic salt line, Dojoliq, is tuned specifically for the COREX mesh platform.

Pod Troubleshooting Decision Tree

When a Vaporesso pod misbehaves, the fault is usually one of four things: a flooded coil, a worn mesh, a clogged airflow path or a pod-to-device contact issue. Use this decision tree to narrow it down without buying a new pod prematurely.

• Gurgling or harsh draw after refill - flooded coil. Lift the pod, blow firmly through the mouthpiece into a tissue to clear excess e-liquid, then rest the pod upright for 5 minutes before the next puff.
• Burnt taste from puff one of a new pod - dry coil. The cotton needs 5 to 10 minutes to wick after the first fill. Refill, rest, then take 3 short priming puffs without firing.
• Burnt taste after several refills - end-of-life mesh. Swap to a fresh pod. Integrated-coil pods last approximately 5 to 10 refills depending on e-liquid sweetness.
• No vapour but battery shows charge - contact issue. Lift the pod, wipe the gold contact pins on both pod and device with a dry cotton bud, refit and try again.
• Leaking from base of pod - over-filled or seal damaged. Empty, wipe the silicone seal, inspect for nicks. If the seal is intact and the pod still leaks, the seal has hardened and the pod is end-of-life.
• Pod won't sit flush in the kit - dirty magnetic contact. Wipe both magnets with a dry tissue and reseat the pod with a firm click.

UK TPD Rules for Vaporesso Pods

Every Vaporesso pod sold on this UK collection is TPD compliant. That means a 2ml maximum capacity on prefilled or sealed-tank pods, a 20mg per ml maximum nicotine strength, child-resistant and tamper-evident packaging, and ingredient disclosure on the pack.

Refillable pods that you fill from a bottled nic salt count against the bottle 10ml MHRA limit rather than the pod own capacity, but the pod itself still has to be a 2ml TPD unit.

The Luxe X COREX 2.0 pod ships globally as a 5ml cartridge - the UK version is the same physical pod re-tuned to a 2ml fill window with a TPD stopper. The Eco Nano pod is similarly a 3.5ml pod outside the UK and a 2ml TPD pod on UK-imported stock.

All current pods carry the 30 month minimum shelf-life sticker on the pack.

Pod Cleaning and Storage

A Vaporesso pod lasts longer if you wipe the mouthpiece and fill plug clean between refills and store the kit upright when not in use. Sticky e-liquid residue around the magnetic contact pins is the single most common reason a kit stops firing - a 10-second wipe with a dry cotton bud fixes it.

Store spare pods sealed in their original blister pack at room temperature away from direct sunlight. Which prevents the e-liquid pre-soaking the cotton wick and breaking down the mesh before first use.

Pods left filled but unused for more than four weeks tend to taste muted on the first restart - empty, rinse with warm tap water, dry overnight and refill fresh.

Vaporesso Pods in the Wider Range

Buying a new kit alongside a pod refill order? The matching kit ranges live at the full Vaporesso brand range, the XROS kit sub-collection, the Luxe sub-collection, the Armour sub-collection or the prefilled Dojo Blast prefilled pod range.

For tank coils that sit outside the pod platform - GTi, GTR, SKRR - the dedicated Vaporesso coils hub is the better landing.