Armour G Pod Kit by Vaporesso

The Vaporesso Armour G is a refillable pod kit built around a sizeable 3000mAh internal battery and a five to 80W adjustable output.

That power range is unusually broad for a pod-form device and is what lets the Armour G cover three distinct vape styles - tight MTL (mouth-to-lung), looser RDL (restricted direct-to-lung) and full DTL (direct-to-lung) clouds - by pairing the right GTX coil with the four-step top airflow.

It sits in the Vaporesso Armour family as the mid-tier pod kit option - lighter and more portable than the Armour S box mod, more flexible than a basic MTL pod, and available in 10 colours so it suits whichever finish you prefer.

Out of the box, the Armour G ships with a 2ml refillable pod and two GTX mesh coils (0.2 ohm and 0.4 ohm) ready for shortfill DTL or RDL vaping. Pop in a higher-resistance 0.8 ohm or 1.2 ohm GTX coil instead and the same device becomes a comfortable MTL vape for nic salts.

The 0.96 inch colour display shows the active mode, wattage and battery level, and the Smart Mode auto-sets wattage by coil resistance so you don't have to think about settings between swaps. The 10 colour options (Black, Silver, Brown, Red, Blue, Green, Pink, Grey Knight, Nebula Green and Pastel Lilac) all share the leather-panel grip and the same internals. Refillable Armour G/GS replacement pods are available separately when you want a spare or a swap.

Features at a Glance

• 3000mAh built-in battery - approximately one to two days of vaping between charges for most users
• 5 to 80W adjustable output - covers the full GTX coil range from 0.15 to 1.2 ohm
• Smart, Pulse and ECO modes - auto-wattage, boosted flavour or battery-saver
• Three vape styles in one device - MTL, RDL and DTL via coil and airflow combinations
• Four-step top airflow ring - twist from tight MTL to wide-open DTL
• 0.96 inch TFT colour display - shows mode, wattage and battery level
• Full Vaporesso GTX coil compatibility - works with every GTX mesh coil currently produced
• 2ml top-fill refillable pod - silicone bung, leak-resistant design, TPD compliant
• USB-C charging - fast top-up from any standard USB-C cable
• 10 colour finishes - leather-panel grip across every colour option

Specifications

3000mAh Battery and USB-C Charging

The 3000mAh internal battery is on the larger end of the pod-kit category - most competing pod devices ship with 1000 to 1500mAh, so the Armour G effectively doubles the typical capacity at this form factor. Real-world runtime depends on the wattage you run at, but most vapers can expect approximately one to two days between charges from full.

ECO Mode stretches that further by capping the output at a lower wattage when you need to make the battery last on a longer day out. Recharging is via the side-mounted USB-C port; any standard USB-C cable will work and a full charge from flat takes roughly 60 to 90 minutes depending on the source.

5 to 80W AXON Chipset and Vape Modes

The Armour G runs on Vaporesso's AXON chipset, which gives you four ways to manage output. Smart Mode reads the coil resistance the moment you install it and automatically dials the wattage to the coil's sweet spot - the easiest option if you don't want to fiddle with settings between coil swaps.

Pulse Mode runs short hotter bursts to lift flavour intensity slightly at the cost of marginally faster battery drain. ECO Mode drops the power for longer runtime.

Manual lets you set a specific wattage anywhere between 5W and 80W if you have a preferred figure. All four modes are selectable from the 0.96 inch screen with the up and down buttons.

GTX Coil Compatibility (Full Range)

One of the strongest reasons to pick the Armour G over a single-coil pod kit is full compatibility with the entire Vaporesso GTX coil family from 0.15 ohm sub-ohm mesh through to 1.2 ohm MTL. The kit includes a 0.2 ohm and 0.4 ohm mesh coil in the box, both aimed at sub-ohm DTL and RDL vaping respectively.

Swap in a 0.8 ohm or 1.2 ohm GTX MTL coil (sold separately) and the same device becomes a tight MTL vape suited to 10 or 20mg nic salt e-liquid. Smart Mode auto-detects whichever coil you fit, so swapping styles is genuinely plug-and-play.

Three Vape Styles - MTL, RDL and DTL

For tight MTL (mouth-to-lung) draws like a cigarette, close the airflow ring fully and fit a 0.8 ohm or 1.2 ohm GTX coil with 10 or 20mg nic salt. For looser RDL (restricted direct-to-lung) - a halfway draw that gives more vapour than MTL but stays cooler than full DTL - open the airflow one or two steps and use the 0.4 ohm coil supplied in the box with 50/50 or nic salt.

For full DTL (direct-to-lung) cloud production, open the airflow fully, fit the 0.2 ohm coil and pair with a 70VG or higher shortfill. The Armour G's four-step airflow ring is precise enough that you can fine-tune the draw within each style.

0.96 Inch Colour Display

The colour TFT screen on the front shows the current mode (Smart / Pulse / ECO / Manual), the set wattage, the detected coil resistance and a clear battery percentage indicator. Several display themes are selectable from the menu if you prefer a different look. The screen is bright enough to read clearly outdoors and the layout is compact enough not to distract from the device's pocketable footprint.

2ml Pod Capacity and Refilling

The Armour G pod holds 2ml of e-liquid (the UK TPD legal capacity). Filling is done from the top via a silicone bung - lift the bung, drip your e-liquid in and reseat.

The bung is leak-resistant and seats firmly when closed. Pods are press-fit into the device with internal magnets so they snap in and out without screwing or twisting. Allow approximately three to five minutes for a freshly installed coil to wick fully before you take the first draws to avoid a dry hit.

Vaporesso Armour G vs Armour GS, Armour S and Armour Ultra

The Armour name covers four distinct devices at Ecigone, so it's worth knowing where the Armour G sits in the lineup before you commit:

• Armour G (this kit) - the mid-tier pod kit. 3000mAh built-in battery, 80W output, refillable 2ml pods, full GTX coil range. Best for someone who wants one device that handles MTL, RDL and DTL without carrying a separate mod.
• Armour GS - the same kit as the Armour G but with one swap: instead of the built-in 3000mAh cell, the GS takes a user-replaceable external 18650 battery (sold separately). Same chipset, same GTX coil platform, same pods, same display, same colours. Pick the GS if you want to carry spare batteries for back-to-back use without waiting for the device to recharge.
• Armour S - the box mod variant. Uses a replaceable 18650 battery instead of an internal cell, fires up to 100W and pairs with the larger iTank or other 510 atomisers. Better if you want a true mod feel, swap-out batteries for long sessions and higher cloud production.
• Armour Ultra - the top-of-line Armour. Higher power ceiling, larger tank format, dual-battery option. Built for high-wattage DTL vapers who want maximum cloud and longest runtime, rather than pod-kit portability.

If you want the most versatile single device without going to a full mod, the Armour G is the right pick. If you already know you want sub-ohm clouds and removable batteries, look at the Armour S or Ultra instead.

Vaporesso Armour G Colours

All 10 finishes share the same leather-panel grip wrapped around an aluminium chassis and the same 0.96 inch screen. Pick whichever suits your taste - the internals and performance are identical across every colour.

What's in the Box

• 1x Vaporesso Armour G Pod Kit (device)
• 1x Armour G Series 2ml refillable pod
• 1x 0.2 ohm GTX mesh coil (pre-installed)
• 1x 0.4 ohm GTX mesh coil (spare)
• 1x USB-C charging cable
• 1x User manual and warranty card

E-Liquid Pairing Recommendations

The Armour G's biggest strength is that it suits both ends of the e-liquid spectrum. Match your e-liquid type to your coil choice and you'll get the best out of the device:

• 0.15 / 0.2 ohm DTL coils - pair with 70VG or higher shortfill e-liquids. Higher VG carries the sweetness and cloud production these coils are built for, and short nicotine (3mg / 6mg) keeps the throat hit comfortable at sub-ohm wattages.
• 0.3 / 0.4 ohm RDL coils - pair with 50/50 freebase or nic salts at 10mg. RDL coils work in the middle ground where both liquid types perform well.
• 0.8 / 1.2 ohm MTL coils - pair with 10 or 20mg nic salts on tight airflow. This setup gives a satisfying cigarette-like draw and the strongest nicotine delivery the Armour G can produce.

Stock up on spare pods, fresh coils and a charging cable to keep the Armour G performing at its best. Replacement Armour G/GS pod cartridges and the wider

Armour Generation Progression

Where this kit sits in the wider Armour lineup. If you are upgrading from an older device or weighing the next step up, these are the direct successor and predecessor kits in the Armour family.

• Upgrade pick Vaporesso Armour GS Pod Vape Kit
• Upgrade pick Vaporesso Armour S Kit
• Upgrade pick Vaporesso Armour Ultra Vape Kit

Other Vaporesso Pod Kits to Consider

If this kit is not quite the right fit, these adjacent Vaporesso kits sit in the same or neighbouring sub-ranges and are worth a look.

• Vaporesso Armour GS Pod Vape Kit
• Vaporesso Luxe X3 Pod Kit
• Vaporesso XROS Pro 2