Blaze MTL RTA

A 22mm single coil MTL RTA from ThunderCloud and Mike Vapes with 360 degree hidden airflow and nine swappable airflow pins covering MTL through RDL. The Blaze uses a two-post build deck with an 8.5mm inner diameter and 15mm post spacing, so it takes standard premade coils without any fiddling. Quarter-turn top fill and a PCTG tank section keep things straightforward. With the option to grab a spare straight glass if needed.

The hidden airflow sits inside the body of the RTA rather than on the outside, which gives the Blaze a clean look and works well on SBS mods where a protruding airflow ring would stick out. On top of the nine pin options, there's infinite stepless adjustment on the external airflow control so you can fine-tune between pin sizes. The whole thing is built in 304 stainless steel with a 316 SS limited edition also available. Backed by a ThunderCloud lifetime warranty.

Key Features

• 22mm diameter in 304 SS (316 SS limited edition available)
• Single coil two-post deck with 8.5mm ID and 15mm post spacing
• 360 degree hidden airflow for a clean profile and smooth intake
• 9 airflow pins covering MTL (0.8, 1.2, 1.4, 1.6mm) and RDL (2.0, 2.5, 3.0, 3.5mm)
• Infinite stepless external adjustment to dial in between pin sizes
• 3ml capacity with PCTG tank (PEI limited edition)
• Quarter-turn top fill for quick refilling
• MTL and RDL ready from a tight cigarette-style draw to a loose restricted lung hit
• ThunderCloud lifetime warranty

Airflow System

Four MTL pins at 0.8, 1.2, 1.4, and 1.6mm and four RDL pins at 2.0, 2.5, 3.0, and 3.5mm give you nine fixed airflow options (plus one pre-installed). Swap the pin to set your baseline draw, then use the stepless external ring to open or close it further. The 0.8mm pin gives the tightest MTL pull in the range, while the 3.5mm opens things up to a full RDL draw.

The airflow adapter is quick-swap, so you can change pins without taking the tank apart. Air enters through the hidden 360 degree intake around the base and travels up under the coil, keeping the outside of the RTA smooth with no visible airflow slots.

Build Deck

Two-post deck with hex grub screws. The 8.5mm inner diameter and 15mm post spacing suit 2.5 to 3mm ID coils, which covers most premade MTL and RDL options. Coil legs drop in from the top and the grub screws clamp from the sides. Blaze Dual Head Shoelace Cotton also available separately for easy wicking.

Colours

• 316 SS (limited edition)
• Matte Black
• SS
• Matte Gunmetal

Blaze MTL RTA Specifications

What's in the Box

• 1 x Blaze MTL RTA
• 1 x PCTG tank section
• 1 x Pyrex glass section
• 1 x MTL PEI drip tip (limited edition)
• 1 x RDL SS drip tip
• 1 x 510 drip tip adapter
• 9 x Airflow pins (4 MTL, 4 RDL, 1 pre-installed)
• 1 x Airflow adapter
• 1 x TC-510 stand
• 1 x Allen key
• 2 x Screwdrivers
• Spare o-rings
• Coils
• Screws
• Lifetime warranty card
• User manual
• Metal carry case

Pick up cotton and wire for your builds, or browse other MTL RTAs and rebuildable tanks in the collection.