Geekvape J Series Replacement Coils

Geekvape J Coils

Geekvape J coils are mesh replacement coils for the Digi Max and Digi Pro pod kits. They push-fit into Geekvape J Empty Pod cartridges, so you swap the coil and keep using the same pod rather than replacing the whole thing. Four resistances from 0.4 ohm up to 1.2 ohm, covering RDL and MTL. Sold in packs of five.

Key Features

Mesh coils in 0.4, 0.6, 0.8, and 1.2 ohm
Push-fit into Geekvape J Empty Pod cartridges
Compatible with Digi Max and Digi Pro pod kits
MTL and RDL coverage across the resistance range
Works with nic salts and 50/50 e-liquids
5-pack quantity

J Coil Resistance and Wattage Guide

Resistance	Wattage	Style	Best With
0.4 ohm	23-28W	RDL	50/50 or slightly higher VG
0.6 ohm	18-25W	RDL / loose MTL	50/50 e-liquids
0.8 ohm	12-18W	MTL	Nic salts, 50/50
1.2 ohm	8-12W	Tight MTL	Nic salts (10-20mg)

The 0.4 ohm runs warmest with more vapour, good for looser RDL draws. At the other end, the 1.2 ohm gives you a tight pull at low wattage, closest to how a cigarette draws. The 0.6 ohm sits in between and handles both MTL and RDL depending on your airflow setting. If you mainly vape nic salts, the 0.8 or 1.2 ohm coils are the ones to go for.

Digi Max and Digi Pro Coil Compatibility

Geekvape J coils fit both the Digi Max and Digi Pro through the J Empty Pod cartridge. You can't use them without the empty pod - the coil pushes into the pod base, then the pod clicks into the kit. Both devices auto-detect your coil resistance and adjust the wattage through Smart Mode. All four resistances work in both kits.

The J coils don't fit other Geekvape pod systems like the Wenax Q2 or Soul 2. Those use their own pod types with built-in coils.

How to Change a J Coil

Pull the old coil straight out of the J Empty Pod base. Push the new one in until it clicks. Before you fill up, drop a few spots of e-liquid onto the exposed cotton inside the coil to prime it. Fill the pod, then leave it for 5 minutes so the cotton soaks through properly. Skipping the priming step usually means a burnt taste on the first few draws.

Geekvape J Coils Specifications

Spec	Detail
Model	Geekvape J Series Replacement Coils
Pack Size	5 coils
Resistances	0.4, 0.6, 0.8, 1.2 ohm
Wattage Range	8-28W (varies by resistance)
Coil Type	Mesh
Installation	Push-fit into J Empty Pod
Vaping Style	MTL, RDL
E-liquid	Nic salts, 50/50 e-liquids
Device Compatibility	Digi Max, Digi Pro

What's in the Box?

5 x Geekvape J Series Replacement Coils (choose resistance: 0.4, 0.6, 0.8, or 1.2 ohm)

By Geek Vape

Geekvape J Series Replacement Coils

£9.16

In Stock

Earn 9 Reward Points

Resistance: 1.2OHM

Multibuy

Price Each

1 to 2

£6.99

3 or more

£6.00

Spend £30.00 for Free Next Day Shipping!

Frequently Bought Together