Lost Mary BM6000 Refill Pods

Lost Mary BM6000 Pods Replacement Range

Lost Mary BM6000 refill pods are the sealed prefilled cartridges that drop into the rechargeable BM6000 pod kit, paired with a separate 10ml auto-refill container per pack. Each BM6000 pod ships with 2ml of 20mg nic salt e-liquid, a QUAQ dual mesh coil built into the pod.

And the 10ml container that feeds liquid into the same 2ml pod via a one-way valve as you vape. One BM6000 pack runs to approximately 6,000 puffs across the pod plus container before the pod is swapped. This page lists every BM6000 pod flavour in stock today across the Lost Mary brand range.

Lost Mary BM6000 refill pods are also called BM6000 prefilled pods, Lost Mary 6000 pods, Lost Mary 6000 refill pods or BM6000 auto-refill pods. They are all the same product line: a 2ml prefilled pod with a 10ml auto-refill container, made for the BM6000 rechargeable kit and not for any other Lost Mary kit family.

Click a 2ml prefilled BM6000 pod into the autoflow kit, let the 10ml auto-refill chamber feed it through the draw-activated sub-ohm coil, and replace the pack when the container window clears. BM6000 ships pod and chamber as a single matched consumable. (more: Lost Mary pods hub)

BM6000 Refill Pods at a Glance

Every Lost Mary BM6000 refill pod runs the same chassis: a sealed 2ml prefilled pod with a QUAQ dual mesh coil, plus a 10ml auto-refill container that feeds the same pod as you vape. The only thing that changes between BM6000 pods is the flavour you choose. The table below sets out the working spec at a glance.

BM6000 Pod Specification	Detail
Pod capacity	2ml prefilled, UK TPD compliant
Auto-refill container	10ml, feeds the 2ml pod via one-way valve
Nicotine strength	20mg nic salt e-liquid only
VG/PG ratio	50/50, TPD compliant
Coil type	QUAQ dual mesh, integrated into the pod
Approximate puffs per pack	Up to approximately 6,000
Vaping style	MTL with fixed airflow
Pack contents	1 prefilled 2ml pod plus 1 matched 10ml container
Compatible kit	Lost Mary BM6000 rechargeable pod kit only
Cross-fit	Does not fit BM600, Nera 30K, Pro Max 7000, Tappo or Hawcos kits

How BM6000 Refill Pods Work

The BM6000 system runs a two-part consumable: a sealed 2ml prefilled pod that holds the QUAQ dual mesh coil, plus a separate 10ml auto-refill container that sits inside the kit alongside the pod. As you vape, a one-way valve draws e-liquid from the 10ml container into the same 2ml pod, topping it up automatically.

Click a 2ml prefilled BM6000 pod into the autoflow kit, let the 10ml auto-refill chamber feed it through the draw-activated sub-ohm coil, and replace the pack when the container window clears. BM6000 ships pod and chamber as a single matched consumable.

Click a 2ml prefilled BM6000 pod into the autoflow kit, let the 10ml auto-refill chamber feed it through the draw-activated sub-ohm coil, and replace the pack when the container window clears. BM6000 ships pod and chamber as a single matched consumable. (more: BM6000 pod kit page)

QUAQ Dual Mesh Coil Inside Every BM6000 Pod

BM6000 pods house a lower-resistance QUAQ mesh tuned for the autoflow draw of the BM6000 kit - warmer vapour and brighter flavour intensity than the BM600 MTL platform, with a consistent profile across the 10ml container feed.

BM6000 pods house a lower-resistance QUAQ mesh tuned for the autoflow draw of the BM6000 kit - warmer vapour and brighter flavour intensity than the BM600 MTL platform, with a consistent profile across the 10ml container feed.

The coil is integrated into the pod: there is no coil head to unscrew, prime or replace separately. When the dual mesh eventually fades, the pod has done its job and the next refill pod from the pack takes over.

2ml Pod Cap and 20mg Nic Salt Compliance

BM6000 refill pods meet UK TPD rules to the letter. The pod itself is capped at 2ml and the e-liquid is fixed at 20mg nic salt at a 50/50 VG/PG ratio, the UK legal maximum strength for prefilled pods sold to consumers.

The BM6000 10ml auto-refill chamber is permitted under TPD because it feeds the sealed 2ml pod via a one-way valve, keeping the vape chamber at the UK 2ml legal cap with the e-liquid fixed at 20mg nic salt.

There is no 0mg, 5mg or 10mg pod option: the platform is built for former smokers stepping across from cigarettes, not for vapers seeking to reduce strength.

Vapers stepping the strength down over time can switch to the bottled Lost Mary 10ml nic salts at 5mg, 10mg or 20mg, used with a refillable MTL pod kit. The bottled range carries many of the same flavour recipes as the BM6000 pods.

Best BM6000 Flavours 2026

Thirty-nine flavours run on the BM6000 platform today, covering fruit, ice, menthol, classic and dessert profiles. Five recipes consistently move the most units across the UK market, based on Ecigone reorder data.

Pick	Profile	Best for
Mad Blue	Blue raspberry over chilled fruit base	Sweet-fruit vapers, the BM6000 best-seller
Blueberry Sour Raspberry	Sweet blue fruit with a tart raspberry kick	Sweet-and-sour fruit drinkers
Watermelon Ice	Ripe watermelon over a clean ice finish	Summer fruit drinkers, all-day vape territory
Triple Mango	Three-layer mango with no ice	Tropical-fruit fans who prefer warm, not chilled
Strawberry Raspberry Blackberry	Triple berry blend, ripe fruit lead	Mixed berry vapers, evening rotation

The full BM6000 flavour grid is below. Stock fluctuates as new flavours land, so check the variant grid before ordering.

Flavours

Browse every BM6000 flavour in stock today. The same recipes that built the original BM6000 single-use catalogue are recreated here as prefilled pods with the matched 10ml auto-refill container.

Pack Life and Refill Cycle

One pack runs to approximately 6,000 puffs on a standard MTL draw, with the 10ml auto-refill container feeding the 2ml pod as you vape. Real-world life depends on draw length, vaping frequency and individual style, so treat the 6,000 figure as a guide rather than a guarantee.

As a working rule, swap the pack when the liquid level window on the kit runs clear, when the flavour notably dulls. Or when the vape starts to taste burnt. The pods and containers are not designed to be opened or manually topped up with bottled e-liquid: the warranty position and safety stance are covered in the FAQs.

The kit-and-pack cost equation favours the rechargeable BM6000 because each replacement pack runs cheaper per ml than the equivalent bottled nic salt plus coil-head combination, and the kit itself is reused indefinitely.

Single-Use BM6000 vs Rechargeable BM6000 Refill Pods

The original BM6000 single-use disposable was withdrawn on the 1 June 2025 ban; the rechargeable BM6000 autoflow kit plus pod-and-chamber refill pack is the current legal format that carries the flavour line forward.

The pod format keeps the same 20mg nic salt strength and the same ~6,000 puff capacity. But the device is now a rechargeable kit and the pod-plus-container pack is the only consumable.

The kit-and-pack cost equation favours the rechargeable BM6000 because each replacement pack runs cheaper per ml than the equivalent bottled nic salt plus coil-head combination, and the kit itself is reused indefinitely.

BM6000 Refill Pods vs Bottled Nic Salt E-Liquid

Lost Mary publishes the BM6000 flavour line in two formats: sealed BM6000 prefilled pods paired with a 10ml auto-refill container that drop into the BM6000 kit. And bottled 10ml nic salts (previously branded Maryliq) for refillable MTL pod kits. The two formats are not interchangeable: a BM6000 pod cannot be filled from a 10ml bottle.

And a bottle cannot be filled into a refillable tank if you only own a BM6000 kit. Vapers running both a BM6000 kit and a refillable MTL kit pair the pod for the BM6000 and the bottle for the refillable, often on the same flavour. Browse the bottled range on the Lost Mary 10ml nic salts collection.

BM6000 vs BM600 Refill Pods

Lost Mary BM6000 refill pods and BM600 refill pods are not cross-compatible. The two product lines sit at different points in the Lost Mary refill range: the BM6000 ships as a 2ml prefilled pod plus a 10ml auto-refill container giving ~6,000 puffs per pack.

And the BM600 ships as a single 2ml prefilled pod with no separate container giving ~600 puffs per pod. Different connector, different pod shape, different consumption model. For the smaller compact platform, head to the BM600 refill pod collection.

The BM600 vs BM6000 comparison guide covers battery, puff count, and pack cost in detail.

BM6000 Refill Pods vs Other Lost Mary Refills

BM6000 refill pods do not cross-fit with any other Lost Mary kit. The pod connector, the pod shape and the consumption model are all different between kit families. Which is deliberate: every Lost Mary kit is built around a dedicated refill line that fits only that kit.

BM6000 pods will not click into a BM600 kit and BM600 pods will not click into a BM6000 kit. Higher coil output, larger container, different pod connector - the two platforms are mechanically and electrically distinct.

• Nera 30K pods and auto-refill containers for the flagship high-puff kit
• Pro Max 7000 refill pods for the mid-puff prefilled kit
• Tappo Pro pods for the slim pen-style kit
• Hawcos Crystal Pro 600 pods for the co-branded compact kit

The full Lost Mary pods hub covers all six pod platforms in one place. To order the kit itself, see the Lost Mary BM6000 pod kit page, which pairs with every pod listed here.

UK TPD Compliance and Post-Ban Status

The BM6000 10ml auto-refill chamber is permitted under TPD because it feeds the sealed 2ml pod via a one-way valve, keeping the vape chamber at the UK 2ml legal cap with the e-liquid fixed at 20mg nic salt.

The BM6000 10ml auto-refill chamber is permitted under TPD because it feeds the sealed 2ml pod via a one-way valve, keeping the vape chamber at the UK 2ml legal cap with the e-liquid fixed at 20mg nic salt.

The original BM6000 single-use disposable was withdrawn on the 1 June 2025 ban; the rechargeable BM6000 autoflow kit plus pod-and-chamber refill pack is the current legal format that carries the flavour line forward.

Where the BM6000 Sits in the UK Refill Pod Market

The BM6000 refill pod sits in the mid-capacity prefilled segment of the UK pod market, between the compact 600-puff BM600 and the high-capacity 30,000-puff Nera 30K. The differentiators on this line are the 10ml auto-refill container (most prefilled pod platforms ship pods only), the QUAQ dual mesh coil. And the breadth of the flavour line at the mid tier.

BM6000 pods will not click into a BM600 kit and BM600 pods will not click into a BM6000 kit. Higher coil output, larger container, different pod connector - the two platforms are mechanically and electrically distinct.

For wider context on the prefilled vs refillable choice in the UK market today, the UK pod kit category covers every platform under one roof. Lost Mary also publishes a complete flavour guide covering the recipe profiles used across the BM6000 line.