VooPoo Vinci E80 Pod Kit

The VooPoo Vinci E80 pod kit runs 5-80W from a 3000mAh built-in battery through the GENE AI 2.0 chipset. VooPoo's Vinci E80 weighs 88.8g in aluminium alloy, which is 20% lighter than older Vinci kits at this wattage. 1.47 inch colour TFT screen with three interface themes showing wattage, voltage, resistance, battery, and puff count. Type-C charging, button fire, and a lock function to stop accidental firing.

Two cartridge systems work with this kit. Vinci E integrated cartridges come in the box at 0.3 ohm and 0.6 ohm with golden cotton wicking that handles around 100ml of e-liquid per cartridge. The Vinci E80 also takes PNP X empty cartridges with the full PNP X coil range from 0.15 ohm DTL up to 1.0 ohm MTL. Three-stage adjustable airflow covers tight MTL through to open DTL. Works with high-VG e-liquids, nic salts, and 50/50 e-liquids.

Key Features

• 5-80W adjustable output, GENE AI 2.0 chipset
• 3000mAh built-in battery, Type-C charging
• 1.47" colour TFT screen, three interface themes
• Vinci E integrated cartridges included: 0.3 ohm and 0.6 ohm
• Golden cotton wicking, approximately 100ml per cartridge
• PNP X empty cartridge compatible (full coil range 0.15-1.0 ohm)
• Three-stage adjustable airflow (MTL, RDL, DTL)
• Button fire with lock function
• Aluminium alloy, 88.8g
• Seven colours including gradients

Vinci E80 3000mAh Battery

3000mAh at 80W max. At moderate DTL wattages around 30-40W you'll get a solid day's vaping. MTL users at 15-20W could stretch it to a day and a half. GENE AI 2.0 keeps the output stable as the battery drains, so you're not getting weaker hits toward the end of the charge. Type-C gets it back up. No swappable batteries, but 3000mAh is generous for an 88.8g pod kit.

Vinci E Cartridges and PNP X Compatibility

Two cartridge systems:

Vinci E integrated cartridges (included) have built-in coils with golden cotton wicking rated to 260 degrees. Each one handles around 100ml of e-liquid before you swap it. Double-sealed against leaks, top-fill port.

Vinci PNP X empty cartridges take the full PNP X coil range via push-fit installation:

Having both systems means you can use the included Vinci E cartridges straight away, then switch to PNP X coils when you want to try different resistances without buying a new kit.

Three-Stage Airflow and Display

Airflow slider with three positions. Closed for tight MTL with higher resistance coils, partially open for RDL, fully open for DTL on the 0.15 and 0.3 ohm coils. Stays where you set it.

The 1.47 inch colour TFT shows everything in real time. Three interface themes to pick from. Button controls for navigation - fire button plus adjustment buttons. The lock function stops it firing in your pocket.

VooPoo Vinci E80 Colours

Seven colours, including two gradient finishes:

VooPoo Vinci E80 Specifications

Why Choose the VooPoo Vinci E80 Pod Kit

3000mAh and 80W with two cartridge systems in a pod kit that weighs 88.8g. Most pod kits lock you into one coil type. The Vinci E80 runs Vinci E integrated cartridges straight from the box and also takes Vinci PNP X empty cartridges with coils from 0.15 ohm DTL to 1.0 ohm MTL.

GENE AI 2.0 keeps output stable even as the battery drains. Three-stage airflow and the full PNP X resistance range cover tight MTL draws on nic salts to open DTL at 80W. Vinci E cartridges with golden cotton last around 100ml each, keeping running costs down. Aluminium build at 88.8g, seven colours, and a lock function that actually stops pocket firing.

What's in the Box?

• 1 x VooPoo Vinci E80 Pod Kit
• 1 x 0.3 ohm Vinci E Cartridge
• 1 x 0.6 ohm Vinci E Cartridge
• 1 x Type-C USB Cable
• 1 x User Manual