OXVA VPrime Pod Kit

The OXVA VPrime is one of the first pod kits with auto-draw DTL vaping. Just inhale and it fires, no button needed, even on the 0.2Ω pod at 60W. A 2600mAh battery keeps it going all day and the 0.96 inch colour screen shows your wattage, resistance, and battery level.

Four pod options cover DTL through to MTL. The 0.2Ω and 0.4Ω are for bigger lung hits, the 0.6Ω sits in the RDL middle ground, and the 0.8Ω gives you a tight MTL draw for nic salts. Unitech 2.0 coil tech is built into each pod. Seven colour options including leather and carbon finishes.

Key Features

• Auto-Draw DTL inhale to fire, no button press, works at up to 60W
• 2600mAh Battery all day use, USB-C charges in under 90 minutes
• 60W Output enough for DTL clouds or dial it back for MTL
• Unitech 2.0 Coils dual mesh tech built into every VPrime pod
• 0.96" Colour Screen wattage, resistance, battery, and built-in themes
• Four Pod Options 0.2Ω, 0.4Ω, 0.6Ω, 0.8Ω
• DTL, RDL, and MTL one kit covers all three vaping styles
• Adjustable Airflow twist the base to tighten or loosen the draw

Auto-Draw Technology

Most DTL pod kits need you to hold a fire button while you inhale. The OXVA VPrime skips that. Draw on the mouthpiece and it fires on its own, even at higher wattages on the 0.2Ω pod. There is a fire button on the VPrime too if you'd rather use it, but the auto-draw is what sets this kit apart.

The auto-draw works across all four pod resistances. Running a 0.2Ω at 60W or a 0.8Ω at 14W for MTL, you get the same hands-free firing either way.

2600mAh Battery and 60W Output

The 2600mAh battery is big for a pod kit. Running the 0.8Ω MTL pod at lower wattage, you'll comfortably get a full day and then some. On the 0.2Ω at 60W you'll burn through it faster, but it still holds up for a solid day of regular use.

USB-C charging brings the VPrime back from flat in under 90 minutes. The 0.96 inch colour screen tracks battery percentage so you're never caught off guard.

Unitech 2.0 Coils

Every VPrime pod has Unitech 2.0 coil tech built in. That's OXVA's dual mesh setup where two mesh strips run side by side, spreading heat more evenly across the cotton. The coil's part of the pod, so when flavour drops off you swap the whole thing for a fresh one.

OXVA's own figures claim up to 50% better flavour and up to 30% longer coil life compared to their standard single mesh coils. Browse VPrime replacement pods for all resistance options.

VPrime Pod Resistance and Wattage

The 0.8Ω is the go-to for nic salts at 10mg or 20mg. For bigger clouds and a wide open draw, the 0.2Ω with a 3mg shortfill is where this kit really comes alive. Our MTL vs DTL vs RDL guide covers the differences if you're not sure which style suits you.

0.96 Inch Colour Screen

The screen shows your current wattage, pod resistance, and battery level. You can tap to adjust settings and swipe through menus. There are built-in themes too so you can change the look of the display straight from the kit.

OXVA VPrime Colours

The VPrime comes in seven finishes across leather, carbon, and solid colour options.

OXVA VPrime Specifications

Why Choose the OXVA VPrime

Auto-draw at 60W is the big selling point. You can run a 0.2Ω DTL pod and fire it just by inhaling, which most pod kits can't do at that wattage. Add in the 2600mAh battery, Unitech 2.0 coils, and four pod options from DTL through MTL, and the OXVA VPrime vape kit covers a lot of ground.

The colour screen, adjustable airflow, and swappable themes are extras that round it out. OXVA VPrime pods are refillable, not prefilled, so you pick your own juice. If you're after something that handles both nic salts and shortfills without needing separate kits, the VPrime does both.

What's in the Box?

• 1 x OXVA VPrime Pod Vape Kit
• 1 x 0.2Ω OXVA VPrime Pod (pre-installed)
• 1 x 0.6Ω OXVA VPrime Pod
• 1 x USB-C Charging Cable
• 1 x User Suggestion Card
• 1 x User Manual