Lost Mary BM6000 Prefilled Pod Kit
By LOST MARY
Lost Mary BM6000 Prefilled Pod Kit
Order within 00:00
For delivery *
Strength: 20MG
Flavour: ACAI BERRY BLUEBERRY
Product Highlights
2ml + 10ml Vape Pod Refill
1000 mAh Built in Battery
Lost Mary Disposable Vape Flavours
Up To 6000 Puffs
Lost Mary BM6000 Vape Kit
The Lost Mary BM6000 is a rechargeable prefilled pod kit by Lost Mary with a 1000mAh battery and OLED screen. Each refill pod gives you approximately 6,000 puffs. One refill pod is included in the box. Browse all 41 BM6000 replacement pod flavours on the Lost Mary BM6000 refills pods collection page.
Key Features
- 1000mAh Battery 8 to 24 hours depending on usage, full charge in 1 to 2 hours
- OLED Display shows battery percentage in real time
- QUAQ Mesh Coil 1.1Ω, built for nic salt e-liquid
- Auto-Refill pod draws from the 10ml container as you vape
- 20mg Nic Salt in every prefilled pod
- Inhale Activated no buttons, no settings
QUAQ Mesh Coil and Auto-Refill
Lost Mary BM6000 uses a QUAQ mesh coil at 1.1Ω. Mesh heats the e-liquid more evenly than a standard round wire coil, so the flavour holds up better from start to finish. You don't swap coils on this kit. When the pod is done, you swap the whole refill pack.
The auto-refill bit is straightforward. Your 2ml pod sits on top of a 10ml container. As you vape, e-liquid feeds up from the container into the pod on its own. No topping up, no filling. Once both the pod and container are empty, pull them out and slot in a fresh BM6000 refill pack.
Battery and OLED Screen
At 1000mAh, the battery in the Lost Mary BM6000 sits between lighter pod kits and bigger kits like the Nera 30K. Light vapers can get a full day. Heavier vapers will want to charge partway through. USB-C charging gets you back to full in 1 to 2 hours.
The OLED screen on the front shows battery percentage. You can see exactly how much charge is left without guessing. There's also a visible e-liquid window on the side of the kit so you know when the refill container is running low.
Lost Mary BM6000 Kit Specifications
|
Spec |
Detail |
|
Dimensions |
100 x 44 x 22mm |
|
Weight |
Not specified by manufacturer |
|
Battery |
1000mAh rechargeable |
|
Charging |
USB-C (not included), full charge 1 to 2 hours |
|
Pod Capacity |
2ml (TPD compliant) |
|
Refill Container |
10ml |
|
Total E-Liquid |
12ml |
|
Nicotine |
20mg nic salt |
|
Puff Count |
Approximately 6,000 (varies by draw length and vaping style) |
|
Coil |
QUAQ mesh, 1.1Ω |
|
Vaping Style |
MTL (mouth to lung) |
|
Activation |
Inhale activated |
|
Display |
OLED battery percentage |
|
Compliance |
TPD compliant, UK legal |
Lost Mary BM6000 Vape Kit Setup Guide
Installation and Use:
- Take the BM6000 pod kit out of the box and remove the manual sticker
- Pull out the silicone bung from the bottom of the kit
- Push the 10ml refill container in firmly until it clicks
- Turn the kit upside down and shake gently to clear air bubbles
- Wait 2 to 3 minutes for the mesh coil to saturate
- Charge via USB-C before first use
- Inhale to vape. No buttons needed.
When both the pod and container run empty, pull them out and slot in a new refill pack. No coil changes needed.
Lost Mary BM6000 Troubleshooting
|
Issue |
Fix |
|
No vapour |
Check pod is clicked in firmly |
|
Weak flavour on first puff |
Wait 2–3 minutes for coil to prime |
|
Screen blank |
Charge via USB-C |
|
Liquid not flowing |
Turn upside down briefly and return upright |
What's in the Box?
- 1x Lost Mary BM6000 Kit (1000mAh rechargeable battery)
- 1x 2ml Prefilled Pod (QUAQ mesh coil, 20mg nic salt)
- 1x 10ml Refill Container
- 1x User Manual
- No USB-C cable included
